2 Channels 15mA per Channel 0.25pA 87 dB Instrumentational OP Amps 0.00006μA 5V~26V ±2.5V~13V AD8626 8 Pins 8-SOIC (0.154, 3.90mm Width)

  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD8626ARZ-REEL7
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 273
  • Description: 2 Channels 15mA per Channel 0.25pA 87 dB Instrumentational OP Amps 0.00006μA 5V~26V ±2.5V~13V AD8626 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)



JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Subcategory Operational Amplifier
Packing Method TAPE AND REEL
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 13V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number AD8626
Pin Count 8
Output Type Rail-to-Rail
Number of Channels 2
Operating Supply Current 1.7mA
Quiescent Current 850μA
Slew Rate 5V/μs
Amplifier Type J-FET
Common Mode Rejection Ratio 87 dB
Current - Input Bias 0.25pA
Voltage - Supply, Single/Dual (±) 5V~26V ±2.5V~13V
Output Current per Channel 15mA
Input Offset Voltage (Vos) 750μV
Gain Bandwidth Product 5MHz
Neg Supply Voltage-Nom (Vsup) -13V
Unity Gain BW-Nom 5000 kHz
Voltage Gain 107.23dB
Average Bias Current-Max (IIB) 0.00006μA
Power Supply Rejection Ratio (PSRR) 104dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 13.5V
Voltage - Input Offset 350μV
Low-Bias YES
Micropower YES
Bias Current-Max (IIB) @25C 0.000001μA
Neg Supply Voltage-Max (Vsup) -13.5V
Input Voltage Noise Density 17.5nV/sqrt Hz
Height Seated (Max) 1.75mm
Length 4.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)

AD8626ARZ-REEL7 Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. This is a J-FET type op amp. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 13V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 750μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 1.7mA . It is a member of the 107.23dB's 107.23dB family. Instrumentation amplifier has 2 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a result, linear amplifier's quiescent current is 850μA.

AD8626ARZ-REEL7 Features

8 Pins
supply voltage of 13V
107.23dB voltage gain
Output Type: Rail-to-Rail

AD8626ARZ-REEL7 Applications

There are a lot of Analog Devices Inc. AD8626ARZ-REEL7 Instrumentational OP Amps applications.

  • Car stereo
  • Precision measurement
  • Professional videography
  • Computer workstations
  • Power control
  • Wireless base stations
  • High gain DC amplifier
  • Instrumentation
  • Voltage regulation circuit
  • High input resistance broadband

Write a review

Note: HTML is not translated!
    Bad           Good