ADA4841-2YRMZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4841 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 30mA |
| Quiescent Current | 1.2mA |
| Slew Rate | 13V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 3μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 30MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 124dB |
| Average Bias Current-Max (IIB) | 5.3μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 40μV |
| Settling Time | 650 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 5.3μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1pF |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4841-2YRMZ-R7 Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Voltage Feedback type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. It has 8 pins that make up the linear amplifier. Op amp ic rates 300μV for input offset voltage. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. You can run this op amp ic on 3mA . 124dB should remain the voltage gain. The op amp ic has 2 channels on it. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 1.2mA quiescent current running through op amp ic.
ADA4841-2YRMZ-R7 Features
8 Pins
supply voltage of 5V
124dB voltage gain
Output Type: Rail-to-Rail
ADA4841-2YRMZ-R7 Applications
There are a lot of Analog Devices Inc. ADA4841-2YRMZ-R7 Instrumentational OP Amps applications.
- earphone
- MP3
- Automotive sensors
- Non-polarized electrodes
- ECG equipment
- Fast A/D and D/A converters
- Biopotential
- Multimedia playback equipment
- Comparator
- Signal operation
