MAX202CSE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Transceiver |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | MAX202 |
| Interface | RS-232 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 8mA |
| Data Rate | 120Kbps |
| Protocol | RS232 |
| Number of Drivers/Receivers | 2/2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Simplex/Duplex | Duplex |
| Number of Receivers | 2 |
| Number of Transmitters | 2 |
| Height | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202CSE+ Overview
Due to the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package contains this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 4.5V~5.5V is used by this differential driver.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.MAX202 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.It is a 16-pin driver IC with enhanced power dissipation controls.A 2 receiver is included.Under 70°C, the operating transceiver module's temperature must be kept below.This optical transceiver should not operate at a temperature lower than 0°C.As far as the transceiver's maximum supply voltage of this IC is concerned, it is rated at 5.5V.An antenna transmits or sends data through 2 transmitters, which are can transceivers used to transmit radio waves to send data.In order to use this line driver ic, it is necessary to have a voltage supply of at least 4.5V.This wide receiver utilizes the 16-SO supplier package.
MAX202CSE+ Features
Tube package
16 pins
MAX202CSE+ Applications
There are a lot of Maxim Integrated MAX202CSE+ Drivers/Receivers/Transceivers applications.
- Ethernet circuitry
- Wireless network systems
- WDM transmission
- Wireless transmission
- Wireless HD Photography
- Tuner
- Cell phones
- Wireless 3D game
- Aircraft navigation
- Gigabit Ethernet
