TPS61150ADRCR
| Parameters | |
|---|---|
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 370mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2MHz |
| Base Part Number | TPS61150 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Max Output Current | 34mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Power Dissipation | 370mW |
| Output Current | 700mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Max Output Voltage | 27V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Min Output Voltage | 2.5V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 34mA |
| fmax-Min | 1.5 MHz |
| Dimming | PWM |
| Number of Segments | 14 |
| Multiplexed Display Capability | NO |
TPS61150ADRCR Overview
In order to save board space, the 10-VFDFN Exposed Pad package is used. This LED driver has 2 outputs.The led light driver is mounted using Surface Mount.It is highly reliable and high-performing when it emerges as a DC DC Regulator.At -40°C~85°C TA, the led driver is capable of operating.A number of benefits are available to Backlight.On the basis of the frequency 1.2MHz, it operates.It operates with 10 terminations.In this LED driver, the base is configured as 10.There are estimated to be 14 segments.The LED driver can be found under the base part number TPS61150.It is acceptable to have a maximum voltage of 6V.There are 10 pins on it.According to its characteristics, it is also categorized into Display Drivers.The minimum input voltage for this device is 2.5V.For maximum efficiency, it requires a minimal supply voltage of 2.5V.In terms of supply current, there is a maximum value of 6V.Its high efficiency is based on the fact that the maximal supply current should not exceed 2mA.You can supply 700mA current to the load.LED drivers deliver all their benefits with a maximum output current of 34mA.2mA current is consumed in the case of no external factors.Voltages above 27V should not be allowed.2.5V is the minimal voltage it outputs.
TPS61150ADRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
TPS61150ADRCR Applications
There are a lot of Texas Instruments TPS61150ADRCR LED Driver ICs applications.
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- Replacement lamps
- Down lights
- Other Electronic Devices
- Refrigeration lighting
- Linear fluorescent
- Architectural lighting
- Flicker-free LED Lighting using R1580N
