N-Channel 2.3mm PMIC INTELLIFET? Series BSP75N 12V TO-261-4, TO-261AA

  • Manufacturer: Diodes Incorporated
  • Nocochips NO: 233-BSP75NTA
  • Package: TO-261-4, TO-261AA
  • Datasheet: PDF
  • Stock: 312
  • Description: N-Channel 2.3mm PMIC INTELLIFET? Series BSP75N 12V TO-261-4, TO-261AA (Kg)



Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-261-4, TO-261AA
Weight 7.994566mg
Manufacturer Package Identifier SOT223 (Type DN)
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e3
Feature Auto Restart
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
Resistance 550mOhm
Terminal Finish Matte Tin (Sn) - annealed
Voltage - Rated DC 60V
Max Power Dissipation 600mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 2.3mm
Current Rating 1.2A
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number BSP75N
Pin Count 4
JESD-30 Code R-PDSO-G4
Output Type N-Channel
Max Output Current 1.3A
Operating Supply Voltage 12V
Voltage 60V
Interface On/Off
Current 1.1A
Output Configuration Low Side
Power Dissipation 1.5W
Output Current 700mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 3 μs
Switch Type General Purpose
Drain to Source Voltage (Vdss) 60V
Turn-Off Delay Time 13 μs
Continuous Drain Current (ID) 1.3A
Ratio - Input:Output 1:1
Voltage - Load 60V Max
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Drain to Source Breakdown Voltage 60V
Number of Drivers 1
Output Peak Current Limit-Nom 1.1A
Rds On (Typ) 385m Ω
Max Junction Temperature (Tj) 150°C
Drain to Source Resistance 500mOhm
Turn Off Time 20 μs
Height 1.7mm
Length 6.7mm
Width 3.7mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

BSP75NTA Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package TO-261-4, TO-261AA.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.A lighting driver with Auto Restart features is available.This object belongs to the BSP75N family.It consists of 4 terminations in total.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 1.3A in order to meet the operation requirements.The supply voltage can be 12V for high efficiency.The lighting driver is mounted in the way of Surface Mount.In total, it has 4 pins.In this case, there is 550mOhm resistance in the LED driving board.Electrical components such as this are included in the INTELLIFET? series.As a result, the output current is set to 700mA.It is recommended to set the supply voltage to 12V for optimum efficiency.It is equipped with 1 drivers.

BSP75NTA Features

Supplied from 12V
Resistance of 550mOhm

BSP75NTA Applications

There are a lot of Diodes Incorporated BSP75NTA Power Switches ICs applications.

  • Solid-State Drives
  • Smartphone and PDA
  • Portable/Handheld Devices
  • Gaming
  • Notebook and Tablet Computers
  • Mobile Communication Devices
  • Hot Swaps
  • Wireless Modem Data Cards
  • Hard Disk Drives
  • Portable Music Players

Write a review

Note: HTML is not translated!
    Bad           Good