HV9922N8-G
| Parameters | |
|---|---|
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.496mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-243AA |
| Number of Pins | 3 |
| Weight | 130.492855mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Applications | Lighting |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.6W |
| Terminal Position | SINGLE |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.5V |
| Current Rating | 50mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | HV9922 |
| Number of Outputs | 1 |
| Max Output Current | 50mA |
| Power Supplies | 50V |
| Max Supply Voltage | 400V |
| Nominal Supply Current | 350μA |
| Power Dissipation | 1.6W |
| Output Current | 50mA |
| Max Supply Current | 350μA |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Output Current per Channel | 50mA |
| Max Output Power | 1.6W |
| Internal Switch(s) | Yes |
| Dimming | Triac |
| Max Input Voltage (DC) | 400V |
| Min Input Voltage (DC) | 20V |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
HV9922N8-G Overview
To save board space, it uses the TO-243AA package. For the design of these LED drivers, 1 outputs are used.In this case, mounting method is Surface Mount.In this case, it emerges as a AC DC Offline Switcher with a high efficiency.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.The benefits it provides to Lighting are considerable.It operates with 3 terminations.To form its configuration, 3 pins are used.1 segments exist.This is mounted by Surface Mount.It can be found under the part number HV9922.An acceptable maximum value for the supply voltage is 400V.According to its characteristics, it is also classified into Display Drivers.This device operates with a minimum input voltage of 85V volts.In terms of supply current, 265V is the maximum value.A minimal supply current is required in order for this device to provide high efficiency.Loads can only be powered by 50mA current.At maximum output current 50mA, it will deliver all the benefits of a LED driver.
HV9922N8-G Features
Available in the TO-243AA package
Operating temperature of -40°C~85°C TA
Supply voltage of 7.5V
HV9922N8-G Applications
There are a lot of Microchip Technology HV9922N8-G LED Driver ICs applications.
- Linear fluorescent
- LED Lightings for Industrial Equipment
- Medical surgery lighting
- Industrial LED Lighting: Image Recognition Devices
- LED Lightings for Inspection Devices
- A- lamps
- Stage Lighting and Signage
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Replacement lamps
