LM3556TME/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFBGA, DSBGA |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LM3556 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.5A |
| Quiescent Current | 750μA |
| Supply Current-Max | 0.75mA |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 1.5A |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.5A Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 1 |
| Switching Frequency | 4MHz |
| Voltage - Supply (Min) | 2.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3556TME/NOPB Overview
16-WFBGA, DSBGA saves board space. LED drivers designed using this technology use 1 outputs.Mounting is done according to the Surface Mount method.It is highly reliable and high-performing when it emerges as a DC DC Regulator.The led light driver can work at -40°C~85°C TA.The benefits are considerable for Camera Flash.The system operates with a termination of 0.It has a base of 16 pins.It is likely that undetermined failures will occur if the voltage supply is less than 2.5V.We estimate that there are 1 segments.There is a mounting of it by Surface Mount.This LED driver can be found under the base part number LM3556.The supply voltage of 5.5V is an acceptable maximum value.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.To meet highest efficiency standards, it works on a supply voltage of 2.5V.1.5A is the maximum amount of current that can be supplied to the load.As long as the switching frequency is maintained at 4MHz, this electronic component is able to perform all of its functions properly.There is no external factor that can consume current, so 750μA current is consumed.
LM3556TME/NOPB Features
Available in the 16-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 4MHz
LM3556TME/NOPB Applications
There are a lot of Texas Instruments LM3556TME/NOPB LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lights
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- A- lamps
- Medical surgery lighting
- Dimmable LED for vehicle interiors
- Replacement lamps
