LM3642TLE-LT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-WFBGA, DSBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM3642 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 750μA |
| Output Current | 1.5A |
| Max Supply Current | 750μA |
| Quiescent Current | 750μA |
| Voltage - Output | 5V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 1.5A |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.5A Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 2.5V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 2mm |
| Width | 1.8mm |
| Thickness | 675μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM3642TLE-LT/NOPB Overview
To save board space, it uses the 9-WFBGA, DSBGA package. LED drivers use 1 outputs for their design.In order to mount the led light driver, Surface Mount is used.With high efficiency, it emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature for the led light driver.Camera Flash has considerable advantages.A frequency of 4MHz is used as the basis for operation.A termination of 9 is used to operate the LED driver.It has a base of 9 pins.Undetermined failures may occur when the voltage supply is less than 2.5V.A total of 1 segments are estimated.The mount is on its way to Surface Mount.It can be found under the part number LM3642.5.5V is a reasonable voltage.There is a voltage output of 5V.Additionally, it can be classified as Display Drivers based on its characteristics.As a result, it is designed to operate at a minimal voltage of 2.5V to ensure the most efficiency possible.The device can deliver high efficiency when the maximal supply current is less than 750μA.1.5A is the maximum amount of current that can be supplied to the load.No external factors result in 750μA current consumption.
LM3642TLE-LT/NOPB Features
Available in the 9-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 4MHz
Supply voltage of 3.6V
LM3642TLE-LT/NOPB Applications
There are a lot of Texas Instruments LM3642TLE-LT/NOPB LED Driver ICs applications.
- Amusement Machines
- Museum lighting
- Portable lighting
- Down lights
- LED backlight driver for LCD displays for portable equipment
- Street lighting
- Industrial LED Lighting: Image Recognition Devices
- Linear fluorescent
- LED backlight driver for LCD displays for Tablets and Note PCs
- Architectural lighting
