LP55281TLX/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP55281 |
| Pin Count | 36 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 600μA |
| Quiescent Current | 350μA |
| Voltage - Output | 4V~5.3V |
| Topology | Step-Up (Boost) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 40mA |
| fmax-Min | 13 MHz |
| Dimming | I2C, SPI |
| Number of Segments | 12 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 3.5mm |
| Width | 3.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA, DSBGA |
| Number of Pins | 36 |
LP55281TLX/NOPB Overview
In order to save board space, the led driver uses the 36-WFBGA, DSBGA package. Surface Mount is used to mount the led driver.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.It is able to work normally at the operating temperature of -30°C~85°C TA.The benefits of Backlight are considerable.It operates with terminations of 36.To form its configuration, 36 pins are used.In the absence of a voltage supply of at least 3V, undetermined failures may occur.12 segments exist.It's mounted by Surface Mount.You can find this LED driver under the base part number LP55281.5.5V is an acceptable maximum value for the supply voltage.There is 4V~5.3V voltage output from this device.In this device, there are 36 pins.In addition to Display Drivers, [1] is assigned in accordance with its characteristics.It achieves maximum efficiency with a minimal voltage supply of 2.7V.It is possible to provide high efficiency when the maximal supply current is less than 600μA.Electronic components can function properly when their switching frequency is set to 2MHz.350μA current is consumed in the case of no external factors.
LP55281TLX/NOPB Features
Available in the 36-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
LP55281TLX/NOPB Applications
There are a lot of Texas Instruments LP55281TLX/NOPB LED Driver ICs applications.
- Dimmable LED for vehicle interiors
- White LED Backlight for portable equipment
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- Sports Facility Lighting
- Down lighting
- LED Lightings for Inspection Devices
- Portable lighting
- Street lighting
- Down lights
