LP8556TME-E02/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | 12V |
| Max Supply Current | 3.65mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~30V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556TME-E02/NOPB Overview
The board's 20-WFBGA, DSBGA package saves space. Using this LED driver, there are 6 outputs.It is possible to mount the led driver using Surface Mount.It emerges as a DC DC Regulator, which is efficient and reliable.It is capable of working normally at -30°C~85°C TA.There are considerable benefits for Backlight.A frequency of 312kHz 625kHz 1250kHz is used as the basis for operation.A termination of 20 is used to operate the LED driver.The configuration of the board is built around 20 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.Based on our estimates, there are 48 segments.LED drivers have a base part number of LP8556.Its output voltage is 16V~30V.Further, its characteristics allow it to be classified as Display Drivers.A minimal supply current is required in order for this device to provide high efficiency.It is necessary to power systems with a voltage of 20VIt is capable of fulfilling its full functionality when the switching frequency remains at 1.25MHz.2.2mA current is consumed in the case of no external factors.
LP8556TME-E02/NOPB Features
Available in the 20-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 1.8V
Operating with the supply voltage of 20V
Switching frequency of 1.25MHz
LP8556TME-E02/NOPB Applications
There are a lot of Texas Instruments LP8556TME-E02/NOPB LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Other Electronic Devices
- Street lighting
- Down lights
- Gallery lighting
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
- White LED Backlight for portable equipment
- Medical surgery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
