MAX233ACWP+G36
| Parameters | |
|---|---|
| Data Rate | 120Kbps |
| Supply Type | Single |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 3500 ns |
| Height | 2.65mm |
| Length | 13mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX233 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Interface | RS-232 |
| Operating Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
MAX233ACWP+G36 Overview
This driver chip is excellent for driving common LEDs due to its enhanced 20-SOIC (0.295, 7.50mm Width) package.There is a Tube package for this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A differential driver like this uses 4.75V~5.25V of power.There can be up to 2/2 eligible receivers/drivers on the field at the same time with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.As a standard package, this transceiver comes with a 20-pin layout that follows the market standard.Since the part number MAX233 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control is provided by this 20-pin driver IC.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In the case of this receiver, a resolution of 2 bits is typically specified.There are two types of input voltage supply available for this IC, 5V.The module isolated transceiver implements a total of 1 transceivers.On the integrator circuit, there are 2 drivers embedded.Using a 10mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.
MAX233ACWP+G36 Features
Tube package
20 pin count
20 pins
MAX233ACWP+G36 Applications
There are a lot of Maxim Integrated MAX233ACWP+G36 Drivers/Receivers/Transceivers applications.
- Fiber-to-the-desktop
- Satellite communication
- Transmission stations
- SONET/SDH Network
- Military satellite communications
- Desktop radio
- Bar, KTV wireless entertainment
- High-speed computer links
- 1x/2x Fiber Channel
- Interconnection between switches and computers
