20 Terminations5V 20 Pin MAX233 Receivers2/2 Drivers/Receivers2 Functions

  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX233AEWP+G36
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 197
  • Description: 20 Terminations5V 20 Pin MAX233 Receivers2/2 Drivers/Receivers2 Functions(Kg)



Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type Transceiver
Subcategory Line Driver or Receivers
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 2
Supply Voltage 5V
Current Rating 4mA
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number MAX233
Pin Count 20
Operating Supply Voltage 5V
Power Supplies 5V
Interface RS-232
Operating Supply Current 10mA
Nominal Supply Current 15mA
Propagation Delay 1 μs
Logic Function Receiver, Transceiver
Data Rate 120Kbps
Differential Output NO
Protocol RS232
Input Characteristics SCHMITT TRIGGER
Number of Drivers/Receivers 2/2
Receiver Number of Bits 2
Duplex Full
Receiver Hysteresis 500mV
Number of Drivers 2
Number of Transceivers 1
Simplex/Duplex Full Duplex
Transmit Delay-Max 3500 ns
Height 2.65mm
Length 13mm
Width 7.6mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX233AEWP+G36 Overview

Driver ICs with enhanced 20-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.Tube package is used for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A power supply of 4.75V~5.25V is used by this differential driver.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.5V is the supply voltage range that this line driver ic can efficiently operate with.This wide receiver has 20 terminations for driving and receiving data signals.A package consisting of 20 market standard pinouts is provided with this integrated circuit.You can search with MAX233 to get more variants of this part, since it identifies the product type, temperature, package, etc.A 20-pin driver IC with enhanced power dissipation control is featured here.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.Driver ICs such as this one are designed to operate from 5V power sources.There are 1 transceivers in total implemented by this IC.The integrator circuit is embedded with 2 drivers.Input voltage is set to a value of 10mA, and this integrating circuit is capable of driving LEDs with that voltage.

MAX233AEWP+G36 Features

Tube package
20 pin count
20 pins
5V power supply

MAX233AEWP+G36 Applications

There are a lot of Maxim Integrated MAX233AEWP+G36 Drivers/Receivers/Transceivers applications.

  • 1x/2x Fiber Channel
  • Military satellite communications
  • Wireless access points
  • Thermal management
  • Single fiber bidirectional application
  • Bridges
  • AV receiver
  • LAN, SAN, WAN (local, storage, work area networks)
  • Wireless projection application for business talks
  • Bar, KTV wireless entertainment

Write a review

Note: HTML is not translated!
    Bad           Good