MAX3232CUE+
| Parameters | |
|---|---|
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3232 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 235Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Interface Standard | EIA-232; TIA-232 |
| Out Swing-Min | 10 V |
MAX3232CUE+ Overview
LED drivers with the enhanced 16-TSSOP (0.173, 4.40mm Width) package will be able to drive a variety of common LEDs with ease.There is a Tube package for this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.A power supply of 3V~5.5V is used by this differential driver.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 16 market standard pinouts so that it can be easily used.As the base part number MAX3232 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 16-pin driver IC with enhanced power dissipation control is featured here.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.In terms of resolution, this ic receiver was capable of providing a 2-bit resolution.There is typically a resolution of 2 bits specified with this receiver.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.Driver ICs such as this one are designed to operate from 3.3/5V power sources.There should be enough current supplied to the VCC pin of the part, but not more than 1mA.
MAX3232CUE+ Features
Tube package
16 pin count
16 pins
3.3/5V power supply
MAX3232CUE+ Applications
There are a lot of Maxim Integrated MAX3232CUE+ Drivers/Receivers/Transceivers applications.
- Car radio
- Radio transmission
- Military satellite communications
- Ethernet circuitry
- Telecom applications
- Low power, low voltage systems
- Wireless HD Photography
- Wireless transmission
- Notebook
- Point-to-point networking
