5 Terminations3.3V 5 Pin 65LVDS1 Receivers1 Bits 1/0 Drivers/Receivers1 Functions

  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN65LVDS1DBVR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 293
  • Description: 5 Terminations3.3V 5 Pin 65LVDS1 Receivers1 Bits 1/0 Drivers/Receivers1 Functions(Kg)



Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Weight 13.012431mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 65LVDS
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
Type Driver
Max Power Dissipation 725mW
Technology TTL
Voltage - Supply 2.4V~3.6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number 65LVDS1
Pin Count 5
Operating Supply Voltage 3.3V
Operating Supply Current 7mA
Power Dissipation 385mW
Propagation Delay 3.1 ns
Turn On Delay Time 3.1 ns
Max Output Voltage 454mV
Data Rate 630Mbps
Output Characteristics DIFFRENTIAL
Differential Output YES
Protocol LVDS
Input Characteristics STANDARD
Number of Drivers/Receivers 1/0
Driver Number of Bits 1
Max Input Current 20μA
Interface Standard EIA-644-A; TIA-644-A
Receive Delay-Max 3.6 ns
Supply Voltage1-Nom 3.3V
Output Low Current-Max 0.008A
Number of Receivers 1
Out Swing-Min 0.2 V
High Level Input Current-Max 0.00002A
Ambient Temperature Range High 85°C
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN65LVDS1DBVR Overview

With the enhanced SC-74A, SOT-753 package, this driver IC is excellent for driving common LEDs.Cut Tape (CT) package is used for this receiver.The Driver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A power supply of 2.4V~3.6V is used by this differential driver.The field can have up to 1/0 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 3.3V supply voltages efficiently.5 terminations are integrated into this wide receiver for driving and receiving signals from data.There are 5 pinouts available on this transceiver which are market standard.Since the part number 65LVDS1 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.This is a 5-pin driver IC with enhanced power dissipation control.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.As mentioned above, the transceiver module is designed to operate from an input voltage supply of 3.3V.The module isolated transceiver contains 1 receivers.There is no matter what the input voltage is. The integrating circuit is able to drive LEDs with an input voltage of 7mA.This line driver integrating circuit represents a power-saving technique that is part of the 65LVDS series.

SN65LVDS1DBVR Features

Cut Tape (CT) package
5 pin count
5 pins
65LVDS series

SN65LVDS1DBVR Applications

There are a lot of Texas Instruments SN65LVDS1DBVR Drivers/Receivers/Transceivers applications.

  • Satellite communications networks
  • Wired telephone
  • Servers
  • transmission relay
  • Aircraft positioning
  • Structural bonding
  • Wireless multimedia center in smart home
  • Desktop radio
  • Wireless teaching
  • Broadcast application

Write a review

Note: HTML is not translated!
    Bad           Good