STP16CPP05TTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 211.997734mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STP16C |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 9.5mA |
| Max Supply Current | 9.5mA |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Current - Output / Channel | 40mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| fmax-Min | 30 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 1.1mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STP16CPP05TTR Overview
The 24-TSSOP (0.173, 4.40mm Width) package saves space on the board. In this LED driver, there are 16 outputs.The mounting method adopted is Surface Mount.It emerges as a Linear, which is efficient and reliable.The LED driver is capable of operating at a temperature of -40°C~125°C TA.30MHz is the frequency in which it operates.It operates using 24 terminations.There are 24 pins used to form the base of its configuration.It is possible for undetermined failures to occur if the voltage supply is lower than 3V.Segments counted are 16.I have mounted it by Surface Mount.The LED driver can be found under the base part number STP16C.As a maximum value, 5.5V is acceptable.There is 20V voltage output from it.There are 24 pins on it.Further, its characteristics allow it to be classified as Display Drivers.For highest efficiency, it works with a minimal supply voltage of 3V.Its high efficiency is based on the fact that the maximal supply current should not exceed 9.5mA.Systems require 5V voltage to operate.
STP16CPP05TTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~125°C TA
Frequency of 30MHz
Supply voltage of 3.3V
Operating with the supply voltage of 5V
STP16CPP05TTR Applications
There are a lot of STMicroelectronics STP16CPP05TTR LED Driver ICs applications.
- Portable lighting
- Amusement Machines
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Gallery lighting
- Architectural lighting
- LED Lightings for Industrial Equipment
- Sports Facility Lighting
- LED backlight driver for LCD displays for portable equipment
- Auxiliary lights for on-vehicle cameras
- Medical surgery lighting
