TLC5926IDBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | TLC5926 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 1.6W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5926IDBQR Overview
On the board, there is also a 24-SSOP (0.154, 3.90mm Width) package that saves space.Using this LED driver, there are 16 outputs.We are using Surface Mount as the mounting method.The system emerges as a Linear with high efficiency.The LED driver is capable of operating at a temperature of -40°C~85°C TA.There are significant benefits for Signage.In this case, the termination value is 24.The LED light driver has a base configuration of 24 pins.The segment count is 16.The LED driver is based on part number TLC5926.5.5V is a reasonable voltage.The voltage output by it is 17V.A total of 24 pins are present on this device.Depending on its characteristics, it is classified into Display Drivers.It operates at a voltage of 3V as its minimal input voltage.As a result, it runs at a minimal voltage of 3V in order to achieve the best efficiency.5.5V is the maximum value of supply current that can be used.With a minimum supply current less than 20mA, this device achieves high efficiency.You can supply 120mA current to the load.It's possible for this electronic component to fully function when the switching frequency is maintained at 30MHz.
TLC5926IDBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5926IDBQR Applications
There are a lot of Texas Instruments TLC5926IDBQR LED Driver ICs applications.
- White LED Backlight for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
- Refrigeration lighting
- Museum lighting
- LED backlight driver for LCD displays for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
- Stage Lighting and Signage
- LED Lightings for Inspection Devices
