TLC5927IDBQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Signage |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Base Part Number | TLC5927 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Power Supplies | 3.3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| Power Dissipation | 1.6W |
| Output Current | 120mA |
| Max Supply Current | 20mA |
| Voltage - Output | 17V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| High Level Output Current | -1mA |
| Low Level Output Current | 1mA |
| Number of Segments | 16 |
| Switching Frequency | 30MHz |
| Multiplexed Display Capability | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLC5927IDBQR Overview
It saves board space with the 24-SSOP (0.154, 3.90mm Width) package. In this LED driver, there are 16 outputs.The led light driver is mounted using Surface Mount.It is highly performing and reliable when it emerges as a Linear.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Signage has many benefits.In this case, there are 24 terminations.The configuration of the board is built around 24 pins.There are 16 segments.LED drivers can be found under the base part number TLC5927.In this case, 5.5V is acceptable.There is 17V voltage output from this device.There are 24 pins on it.According to its characteristics, it is also categorized into Display Drivers.A minimal input voltage of 3V is required for it to operate.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.Supply current is limited to 5.5V at its maximum value.A minimal supply current is required in order for this device to provide high efficiency.The current that can be supplied to the load is 120mA.Having the switching frequency at 30MHz enables this electronic component to perform at its best.
TLC5927IDBQR Features
Available in the 24-SSOP (0.154, 3.90mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz
TLC5927IDBQR Applications
There are a lot of Texas Instruments TLC5927IDBQR LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- LED Lightings for Inspection Devices
- Museum lighting
- Sports Facility Lighting
- Industrial LED Lighting: Image Recognition Devices
- White LED Backlight for portable equipment
- General lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- Replacement lamps
