N-Channel PMIC TPS2042 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)

  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2042BD
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 119
  • Description: N-Channel PMIC TPS2042 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)



Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination SMD/SMT
Resistance 70mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 585.82mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2042
Pin Count 8
Number of Outputs 2
Output Voltage 6V
Output Type N-Channel
Max Output Current 500mA
Number of Channels 2
Interface On/Off
Output Configuration High Side
Power Dissipation 586mW
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Max Output Voltage 6V
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Supply Current-Max (Isup) 0.09mA
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 70m Ω
Height 1.75mm

TPS2042BD Overview

The package is in the form of a Tube.This package is included in 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.It is possible to use 2 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.I believe it belongs to the TPS2042 family.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It has 1 functions.This operation requires the maximum output current to be decreased to 500mA.The supply voltage of 3.3V is conducive to high efficiency.8 pins are equipped with it.In this LED driving board, there is 70mOhm resistance.In this case, the output current will be set to 500mA.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.The total number of channels is 2.Its maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.The LED driver can also be used to produce UNDERVOLTAGE LOCKOUT.It operates at a maximum supply current of 0.09mA.

TPS2042BD Features

Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT

TPS2042BD Applications

There are a lot of Texas Instruments TPS2042BD Power Switches ICs applications.

  • Solid-State Drives
  • Wearable Devices
  • Notebook and Tablet Computers
  • Mobile Communication Devices
  • Solid State Drivers
  • Gaming
  • Portable Music Players
  • Hot Swap
  • PC Cards
  • Wireless/Networking Cards

Write a review

Note: HTML is not translated!
    Bad           Good