banner_page

TPS2051BDR

N-Channel PMIC TPS2051 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2051BDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 540
  • Description: N-Channel PMIC TPS2051 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 70mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature UNDERVOLTAGE LOCKOUT
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2051
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 500mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Supply Current-Max (Isup) 0.07mA
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 70m Ω
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2051BDR Overview


Tape & Reel (TR) is how it's packaged.It is included in the package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family TPS2051.There are 8 terminations in it.The 8 pins are used for the operation of the system.The LED driver has 1 functions.In terms of output, the lighting driver can provide a maximum of 500mA V.Supply voltages of 3.3V allow for high efficiency.8 pins are connected to it in total.In this case, there is 70mOhm resistance in the LED driving board.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.To choose from, there are 1 channels.Voltage input is limited to 5.5V volts.It requires 2.7V volts as the minimum input voltage.Using this LED driver, it is also possible to produce UNDERVOLTAGE LOCKOUT.In order to operate at its maximum capacity, the supply current must not exceed 0.07mA.

TPS2051BDR Features


Supplied from 3.3V
Resistance of 70mOhm
1 channels
Additional features like UNDERVOLTAGE LOCKOUT

TPS2051BDR Applications


There are a lot of Texas Instruments TPS2051BDR Power Switches ICs applications.

  • Handheld Devices
  • USB Ports/Hubs
  • Various applications equipped with buttons
  • Set-Top Boxes
  • USB Power Distribution
  • PC Card Hot Swap
  • Portable Video Game Players
  • Low Voltage I/O System Power
  • USB Power Distribution
  • Portable Devices

Write a review

Note: HTML is not translated!
    Bad           Good