TPS61042DRBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS61042 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 30mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.8V |
| Output Current | 30mA |
| Max Supply Current | 65μA |
| Quiescent Current | 38μA |
| Max Output Voltage | 28V |
| Voltage - Output | 27.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Min Output Voltage | 1.8V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 60mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 30mA |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61042DRBT Overview
To save board space, it uses the 8-VDFN Exposed Pad package. LED drivers with this design have 1 outputs.Surface Mount represents this mounting method.It emergys as a DC DC Regulator with high efficiency and reliable performance.The led light driver can work at -40°C~85°C TA.The benefits of Backlight are considerable.The operation of this system is supported by 8 terminations.With a base of 8, this LED light driver is configured.There are estimated to be 1 segments.TPS61042 is the base part number for this LED driver.The supply voltage of 6V is an acceptable maximum value.27.5V is the voltage output.There are 8 pins on this device.As a result of its characteristics, it is also classified as Display Drivers.A minimal input voltage of 1.8V is required for it to operate.The maximum efficiency standards can be met by operating at the minimal voltage of 1.8V during operation.The maximum supply current is 6V.If the maximum supply current is less than 65μA, the device is capable of providing high efficiency.The current that can be supplied to the load is 30mA.Having the switching frequency at 1MHz enables this electronic component to perform at its best.When operating with a 30mA output current, the LED driver delivers all the benefits.No external factors result in 38μA current consumption.Ideally, the output voltage should not exceed 28V.The minimal voltage it outputs maintains at 1.8V.There is a type Adjustable output on this device.
TPS61042DRBT Features
Available in the 8-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
TPS61042DRBT Applications
There are a lot of Texas Instruments TPS61042DRBT LED Driver ICs applications.
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- LED backlight driver for LCD displays for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED headlights
- Constant Voltage Power Source for portable equipment
- Panel lighting
- Auxiliary lights for on-vehicle cameras
- General lighting
