TPS61169DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 19.986414mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Base Part Number | TPS61169 |
| Number of Outputs | 1 |
| Output Voltage | 38V |
| Output Type | Frequency |
| Max Output Current | 2.4A |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 300μA |
| Output Current | 400mA |
| Max Output Voltage | 38V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 1.8A |
| Min Output Voltage | 2.7V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.8A Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Max Input Voltage (DC) | 5.5V |
| Number of Segments | 10 |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 1.2MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Description
The TPS61169DCKR is a boost converter that powers LEDs in series and has an inbuilt switch FET with a 40-V rating. The boost converter can drive single or parallel LED strings for small- to large-size panel backlighting since it features an integrated 40-V, 1.8-A MOSFET with a minimum 1.2-A current limit. According to the Simplified Schematic, the feedback voltage is controlled to 204 mV and the default white LED current is set with the external sensor resistor RSET. A pulse width modulation (PWM) signal provided to the CTRL pin during operation can be used to adjust the LED current. The duty cycle of the PWM signal defines the feedback reference voltage. The TPS61169DCKR does not burst the LED current, therefore the output capacitor is not subjected to audible noises. The TPS61169DCKR, which disables the TPS61169DCKR to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device under open LED situations, is integrated into the device for optimal protection.
Available in a compact 5-pin SC70 packaging, the TPS61169DCKR.
Features
Open LED Protection
Undervoltage Protection
Built-in Soft-Start
Thermal Shutdown
Up to 90% Efficiency
1.2-A Minimum Switch Current Limit
1.2-MHz Switching Frequency
204-mV Reference Voltage
Internal Compensation
PWM Brightness Control
2.7-V to 5.5-V Input Voltage
Integrated 40-V, 1.8-A MOSFET
Drives LED String up to 38 V
Applications
Blood Glucose Meters
Flashlights
Refrigerators and Ovens
White LED Backlighting for Small and Media Form-Factor Displays
Handheld Data Terminals (EPOS)
Handheld Medical Equipment
Thermostat Display
Smartphone Backlighting
Tablet Backlighting
PDAs, Handheld Computers, GPS Receivers
Portable Media Players, Portable TVs
